There are 4 screws you need to remove.  Two on the outside edge of the panel (where the door meets the jamb), one inside the door handle, and one on the inside edge of the panel (where the vent hole is opposite the mirror).  The three on the edge of the panel are covered with a plastic cover, so you'll have to pop those off first.  Once you get all the screws removed just give a good yank from the bottom and work your way up and around, it will snap off.  You'll have to disconnect the power window switches, door lock, and the curb light wires once you get it off, then it will be completely free.  Hope that helps.