You may have noticed that the front windshield washers are not perfect; e.g. on my Santy -03 the front wipers will go one stroke back and forth before the washer fluid hit the windshield.

This simple mod improves the washers by adding washer valves close to the nozzles just under the hood. This will keep the fluid pressure up all the way to the nozzles.

After this mod you will notice that the washer fluid hit the windshield *before* the wipers start. This is beneficial in salty, icy, snowy and dusty conditions and will long-term reduce wear both on the wiper blades and the windshield itself.

Steps:
1) Get 2 pc. of this type of L-shape washer valves.

2) Get ~10 cm (3"-4") of a fuel hose with inner diameter 5mm. I used a 5mm inner diameter x 12mm outer diameter hose. With this sturdy hose no additional clips are needed for this mod.
3) Cut the fuel hose in 2 pieces ~30-35mm (1.2"-1.4") length. Use a pair of scissors to get clean cuts.
4) Loosen the washer hoses from the nozzles. Attach the fuel hoses to the nozzles. Attach the L-shaped valves to the fuel hoses. Attach the original washer hoses to the valves.

5) (Optional) Before attaching the original hoses to the valves you can trim the excess length.

This is a very simple mod; it shouldn't take more than 10-15 minutes to make it!