Had a relay go out on the manual HVAC dash control that is making position #3 for the fan speed not run the fan. Dealer wanted about $300 with parts and labor to replace - which is amusing since the part should be under 30....
Since I have take the dash apart and pull the HVAC control unit to swap the relay module, I was toying with the idea of getting a salavaged automatic temp. control dash unit. Does anyone know if the harness connections are the same between the manual and the ATC version of the dash controls?
Since I have take the dash apart and pull the HVAC control unit to swap the relay module, I was toying with the idea of getting a salavaged automatic temp. control dash unit. Does anyone know if the harness connections are the same between the manual and the ATC version of the dash controls?
